Indexable Insert Kooldexâ Stub Drill

 

560both.jpg (14044 bytes)

Style 560

       depth @ 2.5 to 3 x Ø
  • Kooldex® unique right hand spiral flute design gets the chips out of the hole and away from the cutting edges.
  • Trigon inserts allow smooth entry and excellent centering.
  • All drills are provided with a whistle notch and Weldon shank flat for adaptability into a variety of tool holders.
  • Coolant feed from the rear of the shank, or side entry port for use on lathes where provisions for coolant throught the back of the turret don't exist.
  • Precise insert location results in greater stability and tool life. 

 

 

EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Shank Diameter "C" Maximum Depth "F" Screw EDP# (2) Incl.With Drill Insert EDP# Not Incl. With Drill TORX Drvr. EDP # Incl. w/Drill
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
56006250 5/8 15.875 .6250 5-3/16 132 2-5/16 59 1 25.4 1.7 43 X560-03 WOMX 030204S,.08R T6
56006875 11/16 17.462 .6875 5-3/8 137 2-1/2 64 1 25.4 1.9 48 X560-03 WOMX 030204S,.08R T6
56007500 3/4 19.05 .7500 5-9/16 141 2-11/16 68 1 25.4 2.1 54 X560-03 WOMX 030204S,.08R T6
56008125 13/16 20.638 .8125 5-3/4 146 2-7/8 73 1 25.4 2.3 59 X560-03 WOMX 030204S,.08R T6
56008750 7/8 22.225 .8750 5-15/16 151 3-1/16 78 1 25.4 2.4 62 X560-03 WOMX 030204S,.08R T6
56009375 15/16 23.813 .9375 6-1/8 156 3-1/4 83 1 25.4 2.6 66 X560-05 WCGX 050304S,.08R T7
56010000 1 25.4 1.0000 6-5/16 160 3-7/16 87 1 25.4 2.8 70 X560-05 WCGX 050304S,.08R T7
56010625 1-1/16 26.988 1.0625 6-1/2 165 3-5/8 92 1-1/4 31.75 2.9 75 X560-05 WCGX 050304S,.08R T7
56011250 1-1/8 28.575 1.1250 6-11/16 170 3-13/16 97 1-1/4 31.75 3.1 79 X560-05 WCGX 050304S,.08R T7
56011875 1-3/16 30.163 1.1875 6-7/8 174 4 102 1-1/4 31.75 3.3 83 X560-06 WCGX 060304S,.08R T10
56012500 1-1/4 31.75 1.2500 7-1/16 180 4-3/16 106 1-1/4 31.75 3.5 88 X560-06 WCGX 060304S,.08R T10
56013125 1-5/16 33.338 1.3125 7-1/4 184 4-3/8 111 1-1/4 31.75 3.6 91 X560-06 WCGX 060304S,.08R T10
56013750 1-3/8 34.925 1.3750 7-7/16 189 4-9/16 116 1-1/4 31.75 3.8 96 X560-06 WCGX 060304S,.08R T10
56014375 1-7/16 36.513 1.4375 7-5/8 194 4-3/4 121 1-1/4 31.75 4 100 X560-06 WCGX 060304S,.08R T10
56015000 1-1/2 38.1 1.5000 7-13/16 198 4-15/16 125 1-1/4 31.75 4.1 104 X560-06 WCGX 060304S,.08R T10
56015625 1-9/16 39.688 1.5625 7-7/8 200 5 127 1-1/4 31.75 4.2 106 X560-06 WCGX 060304S,.08R T10
56016250 1-5/8 41.275 1.6250 7-7/8 200 5 127 1-1/4 31.75 4.2 106 X560-06 WCGX 060304S,.08R T10
56016875 1-11/16 42.863 1.6875 7-7/8 200 5 127 1-1/4 31.75 4.2 106 X560-06 WCGX 060304S,.08R T10
56017500 1-3/4 44.45 1.7500 8-3/8 213 5-1/2 140 1-1/2 38.1 4.6 116 X560-07 WCGX 070304S,.08R T10
56018125 1-13/16 46.038 1.8125 8-3/8 213 5-1/2 140 1-1/2 38.1 4.6 116 X560-07 WCGX 070304S,.08R T10
56018750 1-7/8 47.625 1.8750 8-3/8 213 5-1/2 140 1-1/2 38.1 4.6 116 X560-07 WCGX 070304S,.08R T10
56019375 1-15/16 49.213 1.9375 8-3/8 213 5-1/2 140 1-1/2 38.1 4.6 116 X560-07 WCGX 070304S,.08R T10
56020000 2 50.8 2.0000 8-3/8 213 5-1/2 140 1-1/2 38.1 4.6 116 X560-07 WCGX 070304S,.08R T10

CLICK HERE
FOR
INDEXABLE INSERTS
FOR USE WITH
STYLE 560 INDEXABLE DRILL

 
INDEX

Last Updated on 03/21/02
By Bob Novak Media Development
Copyright Ó1999 CJT KOOLCARB Inc.