Carbide Tip Full Flute Carbide RHC Chucking Reamer

 

480both.jpg (21351 bytes)

Style 480
  • Straight flute, right hand cut.
  • Full flute carbide provides precision hole tolerances on high production runs in aluminum, cast iron, steel, plastics, and other abrasive materials.
  • High speed steel bodies, carbide tipped.
  • Polished flutes for smooth chip flow.
  • Precision ground cutting edges.
  • Use Decimal Size Range column determine the Overall Length, Flute Length and Shank dimensions for modified and grind down reamers only.
 
Diameter Tolerance
Nominal Size Cutting Æ Shank Æ
Inch mm Inch mm
All +.0003 +0.008 +.0000 +0.000
+.0000 -0.000 -.0010 -0.025

 

EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Shank Diameter "C" Decimal Size Range No. of Flts.
Inch mm Inch Inch mm Inch mm Inch mm Inch mm  
48002500 1/4 6.35 .2500 6 152 1-1/2 38 15/64 5.954 .2381-.2530 6.048-6.426 4
48002812 9/32 7.142 .2812 6 152 1-1/2 38 15/64 5.954 .2531-.2840 6.429-7.214 4
48003125 5/16 7.938 .3125 6 152 1-1/2 38 9/32 7.142 .2841-.3150 7.216-8.001 4
48003438 11/32 8.733 .3438 6 152 1-1/2 38 9/32 7.142 .3151-.3470 8.004-8.814 4
48003750 3/8 9.525 .3750 7 178 1-3/4 44 5/16 7.938 .3471-.3780 8.816-9.601 4
48004062 13/32 10.317 .4062 7 178 1-3/4 44 5/16 7.938 .3781-.4090 9.604-10.389 4
48004375 7/16 11.113 .4375 7 178 1-3/4 44 3/8 9.525 .4091-.4410 10.391-11.201 4
48004688 15/32 11.908 .4688 7 178 1-3/4 44 3/8 9.525 .4411-.4720 11.204-11.989 4
48005000 1/2 12.7 .5000 8 203 2 51 7/16 11.113 .4721-.5030 11.991-12.776 6
48005625 9/16 14.288 .5625 8 203 2 51 7/16 11.113 .5341-.5660 13.566-14.376 6
48006250 5/8 15.875 .6250 9 229 2 51 9/16 14.288 .5971-.6280 15.166-15.951 6
48006875 11/16 17.463 .6875 9 229 2 51 9/16 14.288 .6591-.6910 16.741-17.551 6
48007500 3/4 19.05 .7500 9-1/2 241 2 51 5/8 15.875 .7221-.7530 18.341-19.126 6

 

 
INDEX

Last Updated on 11/14/01
By Bob Novak Media Development
Copyright Ó1999 CJT KOOLCARB Inc.