Carbide Tip Ball Nose End Mill

 

335both.jpg (17405 bytes)

Style 335
  • Carbide tipped end mills with hardened steel shanks are ideal for profile, rise and fall duplicating in cast iron, and hardened dies and molds.
  • A replacement for solid carbide end mills where carbide tipped is more affordable.
  • Two flutes, center cut.
 
Diameter Tolerance
Nominal Size Cutting Æ Shank Æ
Inch mm Inch mm
All +.0050 +0.127 +.0001 +0.003
+.0000 -0.000 -.0006 -0.015

 

EDP # Mill Diameter Dec Equiv. Overall Length "A" Carbide Length "B" Shank Diameter "C"
Inch mm Inch Inch mm Inch mm Inch mm
33502500 1/4 6.35 .2500 4 102 .43 11 3/8 9.525
33503750 3/8 9.525 .3750 4-1/2 114 .49 12 1/2 12.7
3350375A 3/8 9.525 .3750 5-1/2 140 .49 12 1/2 12.7
33505000 1/2 12.7 .5000 4 102 .56 14 5/8 15.875
3350500A 1/2 12.7 .5000 5-3/4 146 .56 14 5/8 15.875
33506250 5/8 15.875 .6250 4-3/4 121 .75 19 3/4 19.05
3350625A 5/8 15.875 .6250 6-1/4 159 .75 19 3/4 19.05
3350625B 5/8 15.875 .6250 8 203 .75 19 3/4 19.05
33507500 3/4 19.05 .7500 10 254 .80 20 3/4 19.05

 

 
INDEX

Last Updated on 11/14/01
By Bob Novak Media Development
Copyright Ó1999 CJT KOOLCARB Inc.