Carbide Head Spade Style Die Drill

 

Untitled-1.GIF (5497 bytes)

Style 151
  • Straight Flute, right hand cut, heavy duty web reduces
    breakage drilling shallow holes in hardened steels.
  • 118° point, solid carbide head.
  • 1/4" high speed steel shank.
  • Not recommended for more than 2 x Ø deep.
  • Also see carbide tipped die drills
  • Styles 150 & 152.
 

Diameter Tolerance

Nominal
Size

 Cutting Æ Shank Æ
Inch mm Inch mm
All +.0000 +0.000 +.0000 +0.000
-.0010 -0.025 -.0010 -0.025
151plt.JPG (19308 bytes)

 

EDP Number Cutting Diameter Ø
"D"		 Decimal
Equiv.		 Overall Length
"A"		 Flute Length
"B"
Wire (mm) Inch Inch Inch
15100625   1/16 1.588 .0625 1-1/2 3/8
15100781   5/64 1.984 .0781 1-1/2 3/8
15100938   3/32 2.383 .0938 1-1/2 7/16
15101250   1/8 3.175 .1250 1-1/2 1/2
15101562   5/32 3.967 .1562 1-1/2 9/16
15101875   3/16 4.763 .1875 2 11/16
15102188   7/32 5.558 .2188 2 11/16
15102500   1/4 6.35 .2500 2 13/16
15102812   9/32 7.142 .2812 2 7/8
15103125   5/16 7.938 .3125 2-1/2 7/8
15103438  11/32 8.733 .3438 2-1/2 15/16
15103750   3/8 9.525 .3750 2-1/2 1-1/8
15104062  13/32 10.317 .4062 2-1/2 1-1/8
15104375   7/16 11.113 .4375 2-1/2 1-3/16
15104688  15/32 11.908 .4688 2-1/2 1-3/16
15105000   1/2 12.7 .5000 2-1/2 1-5/16
EDP Number Cutting Diameter Ø Decimal Equiv. Overall Length Flute Length
Wire (mm) Inch Inch Inch

 

 
INDEX

Last Updated on 09/05/02
By Bob Novak Media Development
Copyright Ó1999 CJT KOOLCARB Inc.