Carbide Tip Standard Helix Taper Length Tanged Drill
130both.jpg (35666 bytes)

Style 130
  • Premium C2/K20 carbide provides excellent wear resistance when cutting aluminum casting, bronze, cast and ductile irons, fiberglass, hard plastics, other non-ferrous materials.
  • 118° cam relieved point, strong edge, free cutting.
  • Right hand spiral, right hand cut, high speed steel bodies, heavy duty.
  • 2 to 2.5 times faster speed of standard high speed steel yields faster holes with better hole finish.
  • Tanged shank provides positive drive on back up screws or Morse taper shank drill drivers.
  • Allow 2.5 x Ø up to 1/4" (6.35 mm), 2 x Ø up to 7/16" (11.1 mm), and over 7/16" allow 1.5 x Ø of flute for chip exit.

Diameter Tolerance

Nominal Size

 Cutting Æ Shank Æ
Inch mm Inch mm
Through  
.2500"
6.35mm
+.0000
-.0007		 +0.000
-0.018		 +.0000
-.0030		 +0.000
-0.076
.2501"
6.36mm
To
.5000"
12.7mm
+.0000
-.0010		 +0.000
-0.025		 +.0000
-.0045		 +0.000
-0.114
.5001"
12.71mm
  And Up +.0000
-.0010		 +0.000
-0.025		 +.0000
-.0030		 +0.000
-0.076
 

                                Shk Ø = Cut Ø

 

EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13001250 1/8 3.175 .1250 5-1/8 130 2-3/4 70 2.4 61 .0981-.1290 2.492-3.277
13001406 9/64 3.571 .1406 5-3/8 137 3 76 2.6 66 .1291-.1590 3.279-4.039
13001562 5/32 3.967 .1562 5-3/8 137 3 76 2.6 66 .1291-.1590 3.279-4.039
13001719 11/64 4.366 .1719 5-3/4 146 3-3/8 86 2.9 75 .1591-.1910 4.041-4.851
13001875 3/16 4.763 .1875 5-3/4 146 3-3/8 86 2.9 75 .1591-.1910 4.041-4.851
13001969   5. .1969 6 152 3-5/8 92 3.1 79 .1911-.2210 4.854-5.613
13002031 13/64 5.159 .2031 6 152 3-5/8 92 3.1 79 .1911-.2210 4.854-5.613
13002165   5.5 .2165 6 152 3-5/8 92 3.1 79 .1911-.2210 4.854-5.613
13002188 7/32 5.558 .2188 6 152 3-5/8 92 3.1 79 .1911-.2210 4.854-5.613
13002344 15/64 5.954 .2344 6-1/8 156 3-3/4 95 3.2 81 .2211-.2530 5.616-6.426
13002362   6. .2362 6-1/8 156 3-3/4 95 3.2 81 .2211-.2530 5.616-6.426
13002500 1/4 6.35 .2500 6-1/8 156 3-3/4 95 3.2 81 .2211-.2530 5.616-6.426
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13002559   6.5 .2559 6-1/4 159 3-7/8 98 3.3 83 .2531-.2840 6.429-7.214
13002656 17/64 6.746 .2656 6-1/4 159 3-7/8 98 3.3 83 .2531-.2840 6.429-7.214
13002756   7 .2756 6-1/4 159 3-7/8 98 3.3 83 .2531-.2840 6.429-7.214
13002812 9/32 7.142 .2812 6-1/4 159 3-7/8 98 3.3 83 .2531-.2840 6.429-7.214
13002953   7.5 .2953 6-3/8 162 4 102 3.4 86 .2841-.3160 7.216-8.026
13002969 19/64 7.541 .2969 6-3/8 162 4 102 3.4 86 .2841-.3160 7.216-8.026
13003125 5/16 7.938 .3125 6-3/8 162 4 102 3.4 86 .2841-.3160 7.216-8.026
13003150   8 .3150 6-3/8 162 4 102 3.4 86 .2841-.3160 7.216-8.026
13003281 21/64 8.344 .3281 6-1/2 165 4-1/8 105 3.4 86 .3161-.3470 8.029-8.814
13003346   8.5 .3346 6-1/2 165 4-1/8 105 3.4 86 .3161-.3470 8.029-8.814
13003438 11/32 8.733 .3438 6-1/2 165 4-1/8 105 3.4 86 .3161-.3470 8.029-8.814
13003543   9. .3543 6-3/4 171 4-1/4 108 3.5 88 .3471-.3780 8.816-9.601
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13003594 23/64 9.129 .3594 6-3/4 171 4-1/4 108 3.5 88 .3471-.3780 8.816-9.601
13003740   9.5 .3740 6-3/4 171 4-1/4 108 3.5 88 .3471-.3780 8.816-9.601
13003750 3/8 9.525 .3750 6-3/4 171 4-1/4 108 3.5 88 .3471-.3780 8.816-9.601
13003906 25/64 9.921 .3906 7 178 4-3/8 111 3.6 90 .3781-.4100 9.604-10.414
13003937   10. .3937 7 178 4-3/8 111 3.6 90 .3781-.4100 9.604-10.414
13004062 13/32 10.317 .4062 7 178 4-3/8 111 3.6 90 .3781-.4100 9.604-10.414
13004134   10.5 .4134 7-1/4 184 4-5/8 117 3.8 96 .4101-.4410 10.417-11.201
13004219 27/64 10.716 .4219 7-1/4 184 4-5/8 117 3.8 96 .4101-.4410 10.417-11.201
13004331   11. .4331 7-1/4 184 4-5/8 117 3.8 96 .4101-.4410 10.417-11.201
13004375 7/16 11.113 .4375 7-1/4 184 4-5/8 117 3.8 96 .4101-.4410 10.417-11.201
13004528   11.5 .4528 7-1/2 191 4-3/4 121 3.8 96 .4411-.4730 11.204-12.014
13004531 29/64 11.509 .4531 7-1/2 191 4-3/4 121 3.8 96 .4411-.4730 11.204-12.014
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13004688 15/32 11.908 .4688 7-1/2 191 4-3/4 121 3.8 96 .4411-.4730 11.204-12.014
13004724   12. .4724 7-1/2 191 4-3/4 121 3.8 96 .4411-.4730 11.204-12.014
13004844 31/64 12.304 .4844 7-3/4 197 4-3/4 121 3.8 96 .4731-.5040 12.017-12.802
13004921   12.5 .4921 7-3/4 197 4-3/4 121 3.8 96 .4731-.5040 12.017-12.802
13005000 1/2 12.7 .5000 7-3/4 197 4-3/4 121 3.8 96 .4731-.5040 12.017-12.802
13005118   13. .5118 8 203 4-3/4 121 3.8 96 .5041-.5340 12.804-13.564
13005156 33/64 13.096 .5156 8 203 4-3/4 121 3.8 96 .5041-.5340 12.804-13.564
13005312 17/32 13.492 .5312 8 203 4-3/4 121 3.8 96 .5041-.5340 12.804-13.564
13005315   13.5 .5315 8 203 4-3/4 121 3.8 96 .5041-.5340 12.804-13.564
13005469 35/64 13.891 .5469 8-1/4 210 4-7/8 124 3.9 99 .5341-.5650 13.566-14.351
13005512   14. .5512 8-1/4 210 4-7/8 124 3.9 99 .5341-.5650 13.566-14.351
13005625 9/16 14.288 .5625 8-1/4 210 4-7/8 124 3.9 99 .5341-.5650 13.566-14.351
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13005709   14.5 .5709 8-3/4 222 4-7/8 124 3.9 99 .5651-.5960 14.354-15.138
13005781 37/64 14.684 .5781 8-3/4 222 4-7/8 124 3.9 99 .5651-.5960 14.354-15.138
13005906   15. .5906 8-3/4 222 4-7/8 124 3.9 99 .5651-.5960 14.354-15.138
13005938 19/32 15.083 .5938 8-3/4 222 4-7/8 124 3.9 99 .5651-.5960 14.354-15.138
13006094 39/64 15.479 .6094 8-3/4 222 4-7/8 124 3.9 99 .5961-.6280 15.141-15.951
13006102   15.5 .6102 8-3/4 222 4-7/8 124 3.9 99 .5961-.6280 15.141-15.951
13006250 5/8 15.875 .6250 8-3/4 222 4-7/8 124 3.9 99 .5961-.6280 15.141-15.951
13006299   16. .6299 9 229 5-1/8 130 4 103 .6281-.6590 15.954-16.739
13006406 41/64 16.271 .6406 9 229 5-1/8 130 4 103 .6281-.6590 15.954-16.739
13006496   16.5 .6496 9 229 5-1/8 130 4 103 .6281-.6590 15.954-16.739
13006562 21/32 16.667 .6562 9 229 5-1/8 130 4 103 .6281-.6590 15.954-16.739
13006693   17. .6693 9-1/4 235 5-3/8 137 4.3 108 .6591-.6900 16.741-17.526
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable Flute at Full Regrind "F" Grind Down Range
Inch mm Inch Inch mm Inch mm Inch mm Inch mm
13006719 43/64 17.066 .6719 9-1/4 235 5-3/8 137 4.3 108 .6591-.6900 16.741-17.526
13006875 11/16 17.463 .6875 9-1/4 235 5-3/8 137 4.3 108 .6591-.6900 16.741-17.526
13006890   17.5 .6890 9-1/4 235 5-3/8 137 4.3 108 .6591-.6900 16.741-17.526
13007031 45/64 17.859 .7031 9-1/2 241 5-5/8 143 4.5 115 .6901-.7210 17.529-18.313
13007087   18. .7087 9-1/2 241 5-5/8 143 4.5 115 .6901-.7210 17.529-18.313
13007188 23/32 18.258 .7188 9-1/2 241 5-5/8 143 4.5 115 .6901-.7210 17.529-18.313
13007283   18.5 .7283 9-3/4 248 5-7/8 149 4.7 120 .7211-.7530 18.316-19.126
13007344 47/64 18.654 .7344 9-3/4 248 5-7/8 149 4.7 120 .7211-.7530 18.316-19.126
13007480   19. .7480 9-3/4 248 5-7/8 149 4.7 120 .7211-.7530 18.316-19.126
13007500 3/4 19.05 .7500 9-3/4 248 5-7/8 149 4.7 120 .7211-.7530 18.316-19.126
13008125 13/16 20.638 .8125 10 254 6-1/8 156 4.9 125 .7841-.8150 19.916-20.701
13008750 7/8 22.225 .8750 10 254 6-1/8 156 4.9 125 .8461-.8780 21.491-22.301
13009375 15/16 23.813 .9375 10-3/4 273 6-1/8 156 4.9 124 .9091-.9400 23.091-23.876
13010000 1* 25.4 1.0000 11 279 6-3/8 162 5 128 .9711-1.0030 24.666-25.476

 

 
INDEX

Last Updated on 03/04/02
By Bob Novak Media Development
Copyright Ó1999 CJT KOOLCARB Inc.