Carbide Tip 135° Aeropointä Stub Screw Machine Length Drill
115both.jpg (17045 bytes)

Style 115
  • Premium C-2/K20 carbide provides excellent wear resistance when cutting aluminum casting, bronze, cast and ductile irons, titaniums, fiberglass, hard plastics, and non-ferrous metals. Not recommended for soft steels.
  • 135° four facet split point improves true position and is an excellent starting drill for longer carbide tip coolant fed drills.
  • 2 to 2.5 times faster speed than standard high speed steel with better hole finish.
  • Right hand spiral, right hand cut, high speed steel bodies, heavy duty.
  • Allow 2.5 x Ø up to 1/4" (6.35 mm), 2 x Ø up to 7/16" (11.1 mm), and over 7/16" allow 1.5 x Ø of flute for chip exit.

Diameter Tolerance

Nominal Size

 Cutting Æ Shank Æ
Inch mm Inch mm
Through  
.2500"
6.35mm
+.0000
-.0010		 +0.000
-0.025		 +.0000
-.0030		 +0.000
-0.076
.2501"
6.36mm
To
.5000"
12.7mm
+.0000
-.0010		 +0.000
-0.025		 +.0000
-.0045		 +0.000
-0.114
.5001"
12.71mm
  And Up +.0000
-.0010		 +0.000
-0.025		 +.0000
-.0030		 +0.000
-0.076
 

*Shk Ø = Cut Ø Thru 1".
Øs over 1" thru 1.25", shank
is 1" in Ø and 2.25" in length.

115plt.JPG (4579 bytes)

 

EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11501250 1/8 3.175 .1250 1-7/8 48 7/8 22 .52 13 .0981-.1290 2.492-3.277
11501378   3.5 .1378 2-1/16 52 1 25 .61 15 .1291-.1590 3.279-4.039
11501406 9/64 3.571 .1406 2-1/16 52 1 25 .61 15 .1291-.1590 3.279-4.039
11501562 5/32 3.967 .1562 2-1/16 52 1 25 .61 15 .1291-.1590 3.279-4.039
11501575   4. .1575 2-1/16 52 1 25 .61 15 .1291-.1590 3.279-4.039
11501719 11/64 4.366 .1719 2-3/16 56 1-1/8 29 .70 18 .1591-.1910 4.041-4.851
11501772   4.5 .1772 2-3/16 56 1-1/8 29 .70 18 .1591-.1910 4.041-4.851
11501875 3/16 4.763 .1875 2-3/16 56 1-1/8 29 .70 18 .1591-.1910 4.041-4.851
11501969   5. .1969 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
11502010 7 5.105 .2010 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
11502031 13/64 5.159 .2031 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
11502130 3 5.41 .2130 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11502165   5.5 .2165 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
11502188 7/32 5.558 .2188 2-3/8 60 1-1/4 32 .72 18 .1911-.2210 4.854-5.613
11502344 15/64 5.954 .2344 2-1/2 64 1-3/8 35 .83 21 .2211-.2530 5.616-6.426
11502362   6. .2362 2-1/2 64 1-3/8 35 .83 21 .2211-.2530 5.616-6.426
11502460 D 6.248 .2460 2-1/2 64 1-3/8 35 .83 21 .2211-.2530 5.616-6.426
11502500 1/4 6.35 .2500 2-1/2 64 1-3/8 35 .83 21 .2211-.2530 5.616-6.426
11502559   6.5 .2559 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502570 F 6.528 .2570 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502610 G 6.629 .2610 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502656 17/64 6.746 .2656 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502720 I 6.909 .2720 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502756   7. .2756 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11502812 9/32 7.142 .2812 2-11/16 68 1-1/2 38 .88 22 .2531-.2840 6.429-7.214
11502953   7.5 .2953 2-13/16 71 1-5/8 41 1.0 25 .2841-.3160 7.216-8.026
11502969 19/64 7.541 .2969 2-13/16 71 1-5/8 41 1.0 25 .2841-.3160 7.216-8.026
11503125 5/16 7.938 .3125 2-13/16 71 1-5/8 41 1.0 25 .2841-.3160 7.216-8.026
11503150   8. .3150 2-13/16 71 1-5/8 41 1.0 25 .2841-.3160 7.216-8.026
11503160 O 8.026 .3160 2-13/16 71 1-5/8 41 1.0 25 .2841-.3160 7.216-8.026
11503281 21/64 8.334 .3281 3 76 1-11/16 43 1.0 25 .3161-.3470 8.029-8.814
11503320 Q 8.433 .3320 3 76 1-11/16 43 1.0 25 .3161-.3470 8.029-8.814
11503346   8.5 .3346 3 76 1-11/16 43 1.0 25 .3161-.3470 8.029-8.814
11503390 R 8.611 .3390 3 76 1-11/16 43 1.0 25 .3161-.3470 8.029-8.814
11503438 11/32 8.733 .3438 3 76 1-11/16 43 1.0 25 .3161-.3470 8.029-8.814
11503543   9. .3543 3-1/8 79 1-13/16 46 1.1 25 .3471-.3780 8.816-9.601
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11503594 23/64 9.129 .3594 3-1/8 79 1-13/16 46 1.1 25 .3471-.3780 8.816-9.601
11503680 U 9.347 .3680 3-1/8 79 1-13/16 46 1.1 25 .3471-.3780 8.816-9.601
11503740   9.5 .3740 3-1/8 79 1-13/16 46 1.1 25 .3471-.3780 8.816-9.601
11503750 3/8 9.525 .3750 3-1/8 79 1-13/16 46 1.1 25 .3471-.3780 8.816-9.601
11503860 W 9.804 .3860 3-5/16 84 1-15/16 49 1.1 28 .3781-.4100 9.604-10.414
11503906 25/64 9.921 .3906 3-5/16 84 1-15/16 49 1.1 28 .3781-.4100 9.604-10.414
11503937   10. .3937 3-5/16 84 1-15/16 49 1.1 28 .3781-.4100 9.604-10.414
11504062 13/32 10.317 .4062 3-5/16 84 1-15/16 49 1.1 28 .3781-.4100 9.604-10.414
11504134   10.5 .4134 3-7/16 87 2-1/16 52 1.2 30 .4101-.4410 10.417-11.201
11504219 27/64 10.716 .4219 3-7/16 87 2-1/16 52 1.2 30 .4101-.4410 10.417-11.201
11504331   11. .4331 3-7/16 87 2-1/16 52 1.2 30 .4101-.4410 10.417-11.201
11504375 7/16 11.113 .4375 3-7/16 87 2-1/16 52 1.2 30 .4101-.4410 10.417-11.201
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11504528   11.5 .4528 3-5/8 92 2-1/8 54 1.2 30 .4411-.4730 11.204-12.014
11504531 29/64 11.509 .4531 3-5/8 92 2-1/8 54 1.2 30 .4411-.4730 11.204-12.014
11504688 15/32 11.908 .4688 3-5/8 92 2-1/8 54 1.2 30 .4411-.4730 11.204-12.014
11504724   12. .4724 3-5/8 92 2-1/8 54 1.2 30 .4411-.4730 11.204-12.014
11504844 31/64 12.303 .4844 3-3/4 95 2-1/4 57 1.3 33 .4731-.5040 12.017-12.802
11504921   12.5 .4921 3-3/4 95 2-1/4 57 1.3 33 .4731-.5040 12.017-12.802
11505000 1/2 12.7 .5000 3-3/4 95 2-1/4 57 1.3 33 .4731-.5040 12.017-12.802
11505118   13. .5118 3-7/8 98 2-3/8 60 1.4 36 .5041-.5340 12.804-13.564
11505312 17/32 13.492 .5312 3-7/8 98 2-3/8 60 1.4 36 .5041-.5340 12.804-13.564
11505315   13.5 .5315 3-7/8 98 2-3/8 60 1.4 36 .5041-.5340 12.804-13.564
11505512   14. .5512 4 102 2-1/2 64 1.5 38 .5341-.5650 13.566-14.351
11505625 9/16 14.288 .5625 4 102 2-1/2 64 1.5 38 .5341-.5650 13.566-14.351
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch mm Inch mm Inch mm
11505938 19/32 15.083 .5938 4-1/8 105 2-5/8 67 1.6 41 .5651-.5960 14.354-15.138
11506250 5/8 15.875 .6250 4-1/4 108 2-3/4 70 1.7 43 .5961-.6280 15.141-15.951
11506562 21/32 16.667 .6562 4-1/2 114 2-7/8 73 1.8 46 .6281-.6590 15.954-16.739
11506875 11/16 17.463 .6875 4-5/8 117 2-7/8 73 1.8 46 .6591-.6900 16.741-17.526
11507188 23/32 18.256 .7188 4-3/4 121 3 76 1.9 48 .6901-.7210 17.529-18.313
11507500 3/4 19.05 .7500 5 127 3-1/8 79 2.0 51 .7211-.7530 18.316-19.126
11507812 25/32 19.842 .7812 5-1/8 130 3-1/4 83 2.0 51 .7531-7840 19.129-19.914
11508125 13/16 20.638 .8125 5-1/4 133 3-3/8 86 2.2 56 .7841-.8150 19.916-20.702
11508438 27/32 21.433 .8438 5-3/8 137 3-1/2 89 2.3 58 .8151-.8460 20.704-21.488
11508750 7/8 22.225 .8750 5-1/2 140 3-1/2 89 2.3 58 .8461-.8780 21.491-22.301
11509062 29/32 23.017 .9062 5-5/8 143 3-5/8 92 2.4 61 .8781-.9090 22.304-23.089
11509375 15/16 23.813 .9375 5-3/4 146 3-3/4 95 2.5 64 .9091-.9400 23.091-23.876
EDP # Cutting Æ "D" Dec Equiv. Overall Length "A" Flute Length "B" Usable flute at Full Regrind "F" Grind Down Range
Inch/Wire mm Inch Inch mm Inch