Carbide High Performance Stub TiN/TiAlN Drill

 

114both.jpg (16290 bytes)

Style 114/114A

Depth = 3 x Ø
  • Submicron* carbide grade provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.
  • Stub length and 140° double split point eliminate spot drilling and reaming in many instances.

* Available in steel cutting carbide grade see Style 113.

  • TiN/TiAlN coatings adds lubricity, prevents edge build-up, and protects O.D. margins.
  • Right hand spiral, right hand cut.
  • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard HSS.
  • Allow 1.5 x Ø up to 7/16" (11.1 mm)  and over 7/16" allow 1 x Ø of flute for chip exit.
 
Diameter Tolerance
Nominal
Size		 Cutting Ø Shank Ø
Inch mm Inch mm
All +.0000 +0.000 +.0000 +0.000
-.0010 -0.025 -.0005 -0.013
TiN or TiAlN
Coated		       

  Shk Ø = Cut Ø

 

TiN
EDP #    		newnewyellow.gif (2578 bytes)
TiAlN
EDP # 		Cutting Diameter Ø
"D"		 Decimal Equiv.
 		 Overall Length
"A"		 Flute Length
"B"
Wire (mm) Inch Inch Inch
11400980 11400980A 40 2.489 .0980 1-15/16   9/16
11400984 11400984A   2.5 .0984 1-15/16   9/16
11400995 11400995A 39 2.527 .0995 1-15/16   9/16
11401015 11401015A 38 2.578 .1015 1-15/16   9/16
11401040 11401040A 37 2.642 .1040 2  5/8
11401065 11401065A 36 2.705 .1065 2  5/8
11401094 11401094A   7/64 2.779 .1094 2  5/8
11401100 11401100A 35 2.794 .1100 2  5/8
11401110 11401110A 34 2.819 .1110 2  5/8
11401130 11401130A 33 2.87 .1130 2  5/8
11401160 11401160A 32 2.946 .1160 2-1/16 11/16
11401181 11401181A   3. .1181 2-1/16 11/16
TiN
EDP #    		TiAlN
EDP # 		Cutting Diameter Ø
"D"		 Decimal Equiv.
 		 Overall Length
"A"		 Flute Length
"B"
Wire (mm) Inch Inch Inch
11401200 11401200A 31 3.048 .1200 2-1/16 11/16
11401250 11401250A 1/8 3.175 .1250 2-1/16 11/16
11401260 11401260A   3.2 .1260 2-1/16 11/16
11401285 11401285A 30 3.264 .1285 2-1/16 11/16
11401299 11401299A   3.3 .1299 2-1/16 11/16
11401339 11401339A   3.4 .1339 2-1/16 11/16
11401360 11401360A 29 3.454 .1360 2-1/16 11/16
11401378 11401378A   3.5 .1378 2-5/32 25/32
11401405 11401405A 28 3.569 .1405 2-5/32 25/32
11401406 11401406A   9/64 3.571 .1406 2-5/32 25/32
11401417 11401417A   3.6 .1417 2-5/32 25/32
11401440 11401440A 27 3.658 .1440 2-5/32 25/32
TiN
EDP #    		TiAlN
EDP # 		Cutting Diameter Ø
"D"		 Decimal Equiv.
 		 Overall Length
"A"		 Flute Length
"B"
Wire (mm) Inch Inch Inch
11401470 11401470A 26 3.734 .1470 2-5/32 25/32
11401495 11401495A 25 3.797 .1495 2-5/32 25/32
11401520 11401520A 24 3.861 .1520 2-5/32 25/32
11401540 11401540A 23 3.912 .1540 2-7/32 27/32
11401562 11401562A 15/32 3.967 .1562 2-7/32 27/32
11401570 11401570A 22 3.988 .1570 2-7/32 27/32
11401575 11401575A   4. .1575 2-7/32 27/32
11401590 11401590A 21 4.039 .1590 2-7/32 27/32
11401610 11401610A 20 4.089 .1610 2-7/32 27/32
11401614 11401614A   4.1 .1614 2-7/32 27/32
11401624 11401624A   4.125 .1624 2-7/32 27/32
11401654 11401654A   4.2 .1654 2-7/32 27/32
TiN
EDP #    		TiAlN
EDP # 		Cutting Diameter Ø
"D"		 Decimal Equiv.
 		 Overall Length
"A"		 Flute Length
"B"
Wire (mm) Inch Inch Inch
11401660 11401660A 19 4.216 .1660 2-7/32 27/32
11401673 11401673A   4.25 .1673 2-9/32 29/32
11401695 11401695A 18 4.305 .1695 2-9/32 29/32
11401719 11401719A  11/64 4.366 .1719 2-9/32 29/32
11401730 11401730A 17 4.394 .1730 2-9/32 29/32
11401770 11401770A 16 4.496 .1770 2-9/32 29/32
11401772 11401772A   4.5 .1772 2-9/32 29/32
11401800 11401800A 15 4.572 .1800 2-9/32 29/32
11401820 11401820A 14 4.623 .1820 2-3/8 1
11401850 11401850A